Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Old (c.1967) Sarco/Economy CCHA condensate pump unit dimensions
Options
Jim_158
Member Posts: 11
Does anyone have any old Sarco or Economy Pump Corp. literature showing cast iron receiver dimensions? Specifically the 35 gallon cast iron receiver for model CCHA-15-30D from the mid-late 1960's. See attached bulletin with capacity information, but no dimensions. I have literature and dimensions for the units with a sloped front that I believe were also made by Economy Pump, and sold by Sarco in the late 1950's to early 1960's. I need dimensions for the rectangular (or hexahedral) units.
I also have various old (c. 1950's) Sarco and Pacific Boiler literature and a 1923, No. 51 Crane book if anyone needs information from them.
Thanks,
Jim
I also have various old (c. 1950's) Sarco and Pacific Boiler literature and a 1923, No. 51 Crane book if anyone needs information from them.
Thanks,
Jim
0
Comments
-
I looked through my collection, Jim.
Couldn't find that one, though. Sorry.Retired and loving it.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements