Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit

Uponor Manifold & Brain Cramp!

Kungur Member Posts: 49
I installed an Uponor manifold this Spring during a remodel project and it is now time to tie my Pex supply & return into it. The problem is I cannot rememeber which part of the manifold is the supply and which is the return! It is a vaveless  & the other half has balancing valves.

Would appreciate your help!!


  • Mark Eatherton
    Mark Eatherton Member Posts: 5,837

    are usually on the return manifold.

    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • pipe4zen
    pipe4zen Member Posts: 108
    which manifold?

    The newer EP manifolds have flow meters on the supply, the caps are the return, remove caps for actuatores if using.
This discussion has been closed.