Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Radiator EDR tables
bruce_21
Member Posts: 241
I've looked about but cannot find a chart or table that would tell me the EDR of a radiator give the # of sections, tubes and size. Where can I find this info so I can size the replacement steam boiler properly?
0
Comments
-
Radiator EDR resource
There are several sources on the web but you have to dig a little. One is Hoffman -Space Heating w/ Steam engineering data (yellow booklet) x Wallace Eannace Associates, Burnham.com & Colonialsupply.com. Good luck.
Mike0 -
-
Rod posted this
http://www.heatinghelp.com/files/posts/3688/Boiler%20Sizing%20Chart.pdf
I purchased this book from this site, as I needed to add missing radiators to my system, and it was handy while standing in the snow and cold measuring old radiators. 40 bucks was worth the investment to make sure I purchased the right thing (I got a free bumper sticker, too!):
http://www.heatinghelp.com/products/Books/5/80/E-D-R-Ratings-for-Every-Darn-Radiator-and-convector-youll-probably-ever-see0 -
Thanks again
Thank you! This is just what I need.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements