Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Tekmar D352 help!
Mich
Member Posts: 1
I've bought a house with radiant in-floor heating controlled by a Tekmar house control D352. My floors become HOT wherever the system is turned on. I have read the error messages in the manual, none of which reflect what my panel is showing...all of the indicator lights are on and none of them are blinking! Apparently the 352 has been discontinued and no one in my area seems to know what to do about my way too hot floor. Does anyone have some advice?
0
Comments
-
Website
Hi Mich,
You can find the manual for your Tekmar on their website. www.tekmarcontrols.com. You should be able to download it as a pdf. file, and make a hard copy. Good Luck!
Ross0 -
Tekmar 352
I have a Tekmar 352 controlled system, so I can help if you still are looking for information.0 -
you might have
a bad injection zone valve. If memory serves the 352 does on/off injection.
would need more detail about what's going on and what you have for a system here.Rob Brown
Designer for Rockport Mechanical
in beautiful Rockport Maine.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements