Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Service valves on steam boilers in NYC
Pete C.
Member Posts: 15
I need some help with this. I am a NYC licensed master plumber, installing a Burnham SIN4 in Queens (oil to gas conversion). In the past, anytime we installed steam boilers in NYC that were 350,000btu's or less, we never had to install gate valves in the steam supply and return piping. Now I am being told that NYC changed their requirements and you need gate valves in the steam supply and return piping. Is this true?
This current installation is a single, low pressure 105,000btu steam boiler in a residential two-family house. Have their been any code changes that I should be aware of? Thanks!
This current installation is a single, low pressure 105,000btu steam boiler in a residential two-family house. Have their been any code changes that I should be aware of? Thanks!
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements