Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Information on a Siebe control valve
Ranger0001
Member Posts: 1
I have several line in operation with a Barber Coleman linear actuator. I believe these are not functioning properly due to a pressure differential too great for the Siebe valve to fully close. I would like to know the pressure differential rating of a 2" Siebe brass valve, the only other #'s I could find are 257 (or 275) PSI rating. Does anyone know what these valves are rated for, or where I could go to get this info?
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements