Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

EDR ratings for Steel Convectors

Jason Quinn
Jason Quinn Member Posts: 96
in Strictly Steam
I am in the process of measuring the connected radiation for a steam boiler replacement. The building has various sizes of steel convectors both in length and width (depth?) 4,6,8 and 10. The EDR charts I have available to me offer info for all of this except only gives me the options for either a 20 or 24 inch high cabinet. The actual height of the cabinet/ enclosure is 30 inches. I was told by a rep to interpolate the difference. Does anyone know of another source that includes different cabinet/enclosure sizes?

Comments

  • MikeyB
    MikeyB Member Posts: 696
    EDR Ratings

    Jason, do you have a picture or a name on the elements? You can also check out Dan;s "EDR" book in the book store on this site
  • KeithC
    KeithC Member Posts: 38
    EDR

    I used to post online asking for ratings too. . . it became easier to buy the book EDR than it was to try to explain everything to people via the internet.



    Pick up the book. It's a good buy.



    Keith
  • Jason Quinn
    Jason Quinn Member Posts: 96
    Sounds like good advice....

    Have been meaning to buy it for some time. Thanks.
This discussion has been closed.

Categories