Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Feedback on Buderus products

John R. Hall_2
John R. Hall_2 Member Posts: 24
in THE MAIN WALL
Hey Wallies!



I'm writing some marketing pieces for Buderus as a freelance writer and would like to know if any of you could help me out by answering a couple of very easy questions. If so, please contact me and let me know. I'd really appreciate your expert (and positive) opinions!



And on another note, I am back writing freelance for the ACH&R News, too. It is likely I may need to tap your collective brainpower on a few more occasions.



In advance, thanks. And thanks to Dan for letting me post this message.



-- John R. Hall

There was an error rendering this rich post.

Comments

  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,263
    Feedback

    So, how do we contact you, John?
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,611
    Just click on his name.

    There on the left. It opens a link. 
    Retired and loving it.
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,263
    OK, I see.

    Thanks, Dan.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
This discussion has been closed.

Categories