Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
national boiler
Options
tazz
Member Posts: 2
I am looking for info on the following boiler;
national u.s. radiator corp.
Johnstown PA.
model # a/u 13
It is a 65,000 btu boiler with a hot water heat exchanger at the outlet with an external tankless at rear of boiler.
I would like to know if i can cut both hot and cold water supplies to both without any adverse reactions.
Thanks phil
national u.s. radiator corp.
Johnstown PA.
model # a/u 13
It is a 65,000 btu boiler with a hot water heat exchanger at the outlet with an external tankless at rear of boiler.
I would like to know if i can cut both hot and cold water supplies to both without any adverse reactions.
Thanks phil
0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 886 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements