Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
commercial reach in refrigerator
ddenny
Member Posts: 75
hello
Is it feasible to move the condensing unit of a free standing reach in box from the top of the unit where the manufacturer put it from the unit itself and into a basement. I guess all I have to do is drill a core hole in the floor and extend the refrigerant lines and the wires through the hole into the basement correct? It's an R 22 system and maybe I can add a drier and sight glass. any reason why this can't work?
thanks
dennis
Is it feasible to move the condensing unit of a free standing reach in box from the top of the unit where the manufacturer put it from the unit itself and into a basement. I guess all I have to do is drill a core hole in the floor and extend the refrigerant lines and the wires through the hole into the basement correct? It's an R 22 system and maybe I can add a drier and sight glass. any reason why this can't work?
thanks
dennis
0
Comments
-
fesible it is
but,be careful when recharging,be careful of the hot temps in the basement and be careful of the too cool temps in the basement and be careful of the cold temps in the basement.0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 918 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements