Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Brother M and the Friary Job....

jpf321
jpf321 Member Posts: 1,568
in Strictly Steam
Brother M posted about the Friary job we finished recently over in the MAIN wall... here:

<a href="http://www.heatinghelp.com/forum-thread/130925/Boiler-story-from-a-Franciscan-Friar">http://www.heatinghelp.com/forum-thread/130925/Boiler-story-from-a-Franciscan-Friar</a>



PLEASE REPLY TO THAT THREAD NOT TO THIS ONE...
1-pipe Homeowner - Queens, NYC

NEW: SlantFin Intrepid TR-30 + Tankless + Riello 40-F5 @ 0.85gph | OLD: Fitzgibbons 402 boiler + Beckett "SR" Oil Gun @ 1.75gph

installed: 0-20oz/si gauge | vaporstat | hour-meter | gortons on all rads | 1pc G#2 + 1pc G#1 on each of 2 mains

Connected EDR load: 371 sf venting load: 2.95cfm vent capacity: 4.62cfm
my NEW system pics | my OLD system pics
This discussion has been closed.

Categories