Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Pex Sizes-ID &OD

Kungur
Kungur Member Posts: 49
in Radiant Heating
When pex is sized  i.e. 1/2" is that the ID or the OD?

Comments

  • EricAune
    EricAune Member Posts: 432
    ID

    PEX is marketed here in America by size referring to its inside diameter.



    Just make sure the ID is on the inside and the OD stays on the outside.

    There was an error rendering this rich post.

This discussion has been closed.

Categories