Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Help !! I need a EDR ...
Options
Big Ed_4
Member Posts: 2,785
I can't find my book ..sigh .. And I have a nice lady with a hole in her Thatcher :) Please , A National Radiator Aero , 5 collum , 27.75" tall what is the EDR per sec ( looks like 2.5" per section), and one sunrad 13W 20"H 6 section .. Any help Thanks
Eddie
Eddie
I have enough experience to know , that I dont know it all
0
Comments
-
Aero
Ed, Aero is a tube radiator, not a column. Unless I'm missing something.
Also, I'm showing 30" and 26" heights.Retired and loving it.0 -
Cast Iron
Thank Dan, , No they are free standing cast iron , should be under 1940's , Nation Radiator , under there Areo series .. I looked them up before in your Every Damm Radiator bookI have enough experience to know , that I dont know it all0 -
Just went through the book, page by page.
This is the only thing I can find for National Aero, Ed.Retired and loving it.0 -
Thanks Again
Yes ... Thanks for looking them up .. Just arrived home and found my book too..Whew.. I see my confusing mixing tube with collum..
Thanks AgainI have enough experience to know , that I dont know it all0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements