Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burner shuts down prematurely
Ed_24
Member Posts: 6
I was hoping for some suggestions to troubleshoot my "old" <strong>Arcoflame American</strong> <strong>Standard</strong> oil burner.
The burner is <strong>not </strong>firing up without hitting the reset button. After I hit the reset button it only runs for approximately 5 mins and shuts down again. Each time I hit the reset the same thing happens.
I would appreciate any help.
Thank you!
Ed
The burner is <strong>not </strong>firing up without hitting the reset button. After I hit the reset button it only runs for approximately 5 mins and shuts down again. Each time I hit the reset the same thing happens.
I would appreciate any help.
Thank you!
Ed
0
Comments
-
try posting in the oil forum as well
try posting in the oil forum as well1-pipe Homeowner - Queens, NYC
NEW: SlantFin Intrepid TR-30 + Tankless + Riello 40-F5 @ 0.85gph | OLD: Fitzgibbons 402 boiler + Beckett "SR" Oil Gun @ 1.75gph
installed: 0-20oz/si gauge | vaporstat | hour-meter | gortons on all rads | 1pc G#2 + 1pc G#1 on each of 2 mains
Connected EDR load: 371 sf venting load: 2.95cfm vent capacity: 4.62cfm
my NEW system pics | my OLD system pics0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 75 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 93 Geothermal
- 150 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 921 Plumbing
- 6.1K Radiant Heating
- 373 Solar
- 15K Strictly Steam
- 3.3K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements