Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Radiant Heat & The Joist Trak System
Rolf
Member Posts: 1
I'd appreciate any input the group can offer. I'm down to the final issues in signing a new client and he is really intent to using radiant heat and quite certain that we should use a conductive system versus convective. He just asked about a system called Joist Trak and I'm curious if anyone has any experience with the product.
Thanks,
Rolf
Thanks,
Rolf
0
Comments
-
Many plates installed.
I use 3/8" tubing. I screw in the plates, I know others use a pneumatic staple.
The only way in my opinion to do a joist install is using extruded aluminum.
Good Luck.0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements