Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Expansion Tank
Chris_64
Member Posts: 2
12" x 48" tank that is horizontal has lots of surface area for water to touch air. Would it be better to put it vertical with the same presser. Would take longer for the air to leak into the water?
0
Comments
-
yes it would take longer
the thing is why not use a bladder style tank instead?Cost is what you spend , value is what you get.
cell # 413-841-6726
https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating0 -
The air moves from the tank by gravity circulation.
If you use an Airtrol fitting in the tank the gravity circulation will stop and the air will remain in the tank much longer. It's a simple solution.Retired and loving it.0 -
I`ll second the Airtrol fitting,,,
I use them all the time. :-)0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements