Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Aluminum Transfer Plates-Homemade??

Kungur
Member Posts: 49
As i start the process of thinking through a radiant floor system that is installed under the subfloor I was wondering. Has anyone fabricated their own transfer plates? If so what did you use and how did you go about it?
Thanks
Thanks
0
Comments
-
Homemade plates
I saw a video on You Tube w/ a guy making his own plates w/a homemade press, it was pretty cool, try searching for it on You Tube0 -
sure
but it's pretty hard to get a nice tubing groove. remember contact is important.Rob Brown
Designer for Rockport Mechanical
in beautiful Rockport Maine.0
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 106 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 104 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 953 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements