Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Looking For

Options
CMadatMe
CMadatMe Member Posts: 3,086
A commerical Oil-Fired Furnace that is capable of pushing enough CFM to do 15 Tons of cooling (6000 CFM)? Anyone out there know of any? Thanks.

There was an error rendering this rich post.

Comments

  • don_9
    don_9 Member Posts: 395
    Options
    Adams.

    This may be of help.adamsmanufacturing.com/oil gas.html.I know re michel is a distributor for them.

    They say that some of their oil furnaces have a firing rate from 700.000 to 1.000.000 btus.I would have to assume that the fan drive would have to be fairly close to what you are looking for at those btus.

    Worth a try.
  • CMadatMe
    CMadatMe Member Posts: 3,086
    Options
    Thanks for the Lead

    I happen to stumble on them earlier this afternoon. They do do one. Not a bad price either. Thanks again.

    There was an error rendering this rich post.

This discussion has been closed.