Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

WM '02' error code

Options
Timco
Timco Member Posts: 3,040
in THE MAIN WALL
Wasn't there some talk about WM Ultra series 2 having an issue with 02 error code and locking out? Just got a call about one and will see it Monday...



Tim
Just a guy running some pipes.

Comments

  • Unknown
    Unknown
    edited November 2009
    I had that Friday Tim,,

    In my case it was caused by a few drops of water(and I DO mean drops!), from my hose connection draining the exp. tank. Read my "first Ultra experience" thread.



    I had to tear the top of the boiler open, remove the MCBA, open its cover,,,, then use a blow-dryer. Luckily after about an hour I was successful,,,



    Good Luck!  :-)  
This discussion has been closed.

Categories