Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Progression of Combustion Efficiency
SpeyFitter
Member Posts: 422
I read one of Mark Eathertons articles where he claimed to have a 95% new Giannoni heat exchanger boiler (Munchkin?) that went to about 60% efficiency after 3 years (without being serviced).
What I'd like to hear from you guys about is how is the progression of combustion efficiencies based on time for condensing boilers versus conventional boilers that you've serviced/installed over time? Any input would be much appreciated
What I'd like to hear from you guys about is how is the progression of combustion efficiencies based on time for condensing boilers versus conventional boilers that you've serviced/installed over time? Any input would be much appreciated
There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 948 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements