Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Slope and Shift.
Viess
Member Posts: 58
Hey all. Can anybody tell me what the relationship between slope and shift is on the Vitodens 200 WB2B. It's getting down around 20 below and the indoor temps keeps getting higher(74) 70 is the target temp. I'm turning the temp wheel down on the boiler. Right now it's at 48 degrees. I think I need to re program the slope and shift? Any thoughts on how to set the two? Thanks Viess.
0
Comments
-
Got Answere
From a RI tech guy today. He walked me through the process. Viessmann is TOPS!0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements