Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Kitchen boiler
Ron Jr._3
Member Posts: 605
in Oil Heating
This Slant Fin boiler was more than 3 times the size this house needed . A burner firing 1.50 gph in a kitchen is kinda loud ...........
We installed a Peerless . Even with the lowest firing rate it's still about 10 percent overfired . A little extra for the hot water demand I guess . And the customer was shocked how quiet it was compared to the other one .
We installed a Peerless . Even with the lowest firing rate it's still about 10 percent overfired . A little extra for the hot water demand I guess . And the customer was shocked how quiet it was compared to the other one .
0
Comments
-
You da man
Hey Ron see your still workin with the boiler shoe horn! Nice job as always !!!
David
aka the real Drpeper0 -
Thanks alot Dave
How you been ? It's been a long time .0 -
Keepin at it,
Been good and you? Nice to be back on the wall, have i missed anything good??. I like the new lay out, Dan as always has done good !!
David0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements