Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

found problem

Options
Timco
Timco Member Posts: 3,040
in THE MAIN WALL
I heard  banging in a steam pipe so I took it apart to see what the problem was. Turns out that darn balloon boy was the issue! He sure got around!
Just a guy running some pipes.

Comments

  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,011
    Options
    Balloon Boy

    ?



    Whatever it is, it looks small.  Is that big enough to cause the banging?
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • Dave Stroman
    Dave Stroman Member Posts: 765
    Options
    tiny toy

    It was big enough to disrupt air traffic at DIA.

    There was an error rendering this rich post.

  • Unknown
    Unknown
    Options
    Not the cause

    I heard on TV  that the story "wouldn't hold water" so i don't think it's the cause of the banging....
  • Jim Pompetti
    Jim Pompetti Member Posts: 552
    Options
    How

    you track it down.
  • Wayco Wayne_2
    Wayco Wayne_2 Member Posts: 2,479
    Options
    That darned baloon boy

    seems to be getting in everywhere. I for one can not get enough of this wacky publicity starved family......... NOT!!! 
This discussion has been closed.

Categories