Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

looking for a swivel 90* elbow

michael_34
michael_34 Member Posts: 304
in THE MAIN WALL
made of copper, cast iron, any kind of metal. Does not matter what application it is used for as long as it does not leak or let in air.

Thanks,

Michael

Comments

  • michael_34
    michael_34 Member Posts: 304
    This is a sad day...

    When I have to reply to my own post! What the heck, no input at all : )

    jez O pete!

    : )
  • Unknown
    Unknown
    Go easy mike,

    Swivel 90`s are not vast in this trade!



    Are you looking-for a union type 90,,,, or something more used in a car wash?
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,858
    Shark Bite??

    They swivel...



    ME

    There was an error rendering this rich post.

  • bill_105
    bill_105 Member Posts: 429
    the perfect swiveling 90

    Hose! Maybe some steel braided sfuff with bomb proof fittings.
  • hot_rod
    hot_rod Member Posts: 23,184
    what size?

    check out the hydraulic fittings in the Graingers catalog.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • michael_34
    michael_34 Member Posts: 304
    Swivel 90

    I am looking for 1" and has to handle solar temps (supply to collector).

    No offense Dave, just having some fun. So one has to get a stir from you old wrenchers : )

    thanks,

    Michael
  • Unknown
    Unknown
    # Michael Reply

    Non taken,,,,,,hope you make-out OK!
  • Unknown
    Unknown
    McMaster -Carr

    Try McMaster-Carr.  They carry a lot of different fittings.



      http://www.mcmaster.com
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,212
    Swivel

    Victualic........that's the only thing I can think of.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
This discussion has been closed.

Categories