Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
gallons in 100 feet - 3/8 tubing
Leo_G
Member Posts: 89
Looking for a proper chart with these kinds of values. Anyone help?
Leo G
Leo G
0
Comments
-
"Complete Design Assistance Manual"
Pulled this out of the Wirsbo "Complete Design Assistance Manual" Copy write 2004, page 23:
1/4" nom inside dia. .24 gallons/100'
3/8" nom inside dia. .50 gallons/100'
1/2" nom inside dia. .92 gallons/100'
5/8" nom inside dia. 1.34 gallons/100'
3/4" nom inside dia. 1.84 gallons/100'
1" nom inside dia. 3.03 gallons/100'
1 1/4" nom inside dia. 4.53 gallons/100'
1 1/2" nom inside dia. 6.32 gallons/100'
Hope this helpsThere was an error rendering this rich post.
0 -
.50 gallons per 100 feet
http://www.alliedpex.com/LITERATURES/Material_Specification_Sheet_Non_Barrier_PEX.pdf
Hiya Leo!
METhere was an error rendering this rich post.
0 -
Thanx!
Guys, really appreciated!
Leo G0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements