Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Isometric Boiler Piping in Visio
PaulR
Member Posts: 25
I was taking a break from some reading today and was poking around online for some new Visio stencils and I found these isometric piping stencils.
I created a 3D stencil for zone valves and air-separators but still need to come up with a circulator.
Yes, I know I need help, but drawing in Visio IS part of my 10-step program for hydronic sanity.
Paul
I created a 3D stencil for zone valves and air-separators but still need to come up with a circulator.
Yes, I know I need help, but drawing in Visio IS part of my 10-step program for hydronic sanity.
Paul
0
Comments
-
Now if we can just break you from using zone valves :-)
Admitting you have a problem is the first step to recovery.
Welcome to the "Other Side" :-)
Good to see you.
MEIt's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements