Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
safety for installing solar collectors on a pitched roof

jon_22
Member Posts: 2
ross get safety harness and roof anchor half inch dia rope and a rope grap and you will be good to go
0
Comments
-
how to make a pitched roof solar hot water job safe
I am bidding a job with 3 flat plate collectors to go on a 45 degree pitched roof. We normally do flat roof jobs, so how can I make it safe -when there is no place to tie a harness to to set and pipe the collectors.0 -
Texas Hold Um
google Reeves Texas Hold Um. Plenty of other brands, possibly rent one to try.
hrBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Thank you for the advice
I wanted to thank you for the advice
Ross0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 105 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 949 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements