Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Main Venting Q w/ Gortons & Dunham AE
Options
gerry gill_2
Member Posts: 30
installed anywhere near the air eliminator and on the dry return will work just fine.
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=360&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=360&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Main Venting w/ Gortons & Dunham AE
I have a two pipe system with a Dunham Air Eliminator.
Q: If I choose to upgrade the venting and add Gorton #2s, can they be added to the near piping above the Dunham AE?
Or, Instead of the Dunham Air Eliminator? Where is best location for Gortons?
The pictures show a stack of 2 (was 3 originally) 1/2" pipes connected above the Return Main from crossover vents. 1/2" vent pipe to Dunham AE.
Q: The near piping of the Dunham AE is 1/2". It seems smallish to me. Would it make sense to try to convert to 3/4" manifold near piping to vent the Gortons? I have been looking at Gerry's site.
Thanks
GN Homeowner0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements