Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Can Schedule 10 two inch pipe be bent?

Options
Rich Kontny_3
Rich Kontny_3 Member Posts: 561
in THE MAIN WALL
The old fashioned way of packing the pipe with clean sand and heating it with a rosebud. This is how we were taught in Apprenticeship Class'

Schedule 10 might be interesting though. You could purchase railing fittings and make the bends that way

Comments

  • Larry C_13
    Larry C_13 Member Posts: 94
    Can Schedule 10 two inch pipe be bent?

    Can Schedule 10 two inch pipe be bent? I have lengths of 2" pipe that came from a sprinkler rip out. I am thinking of making some inverted "U" and burying them in the ground to make endposts to stack firewood between. Is schedule 10 thin enough to bend like rigid electrical conduit?

    Thanks,

    Larry C
This discussion has been closed.

Categories