Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
anti-freeze
Brian Maffioli_2
Member Posts: 13
Hey everyone. I have a job where we are converting an old steam system to hot water. I am concerned about some of the piping in uninsullated exterior walls.
I know anti-freeze is an option but I am worried that the old rads and cast iron baseboard may start to leak if we go this route.
Any advice and thoughts would be appreciated.
I know anti-freeze is an option but I am worried that the old rads and cast iron baseboard may start to leak if we go this route.
Any advice and thoughts would be appreciated.
0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 975 Plumbing
- 6.3K Radiant Heating
- 386 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements