Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vento cast iron heaters
Plumber7
Member Posts: 19
I did a search and it brought me back to "Heating Help" Found the info on the site. These 4 rads added 344 sq ft to the calculations. Thanks Dan!! Tom
0
Comments
-
Vento cast iron heaters
I used Dan's book (EDR) to get information on several different radiators and convectors I couldn't find anywhere else. "EDR" refers to this heater but there is so much information it wouldn't fit in the book. I'm looking for Steam ratings (sq ft) for a Vento cast iron heater that is 3-3/4" thick x 11-1/2' H x 41" long x 8 sections. I have 4 of these in a large 2 story room in a home. Thank you. Tom0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 893 Plumbing
- 5.9K Radiant Heating
- 379 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements