Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

3 Day Design Gas Equipment Combustion Testing Seminar

MikeyB
MikeyB Member Posts: 696
Tim, any chance of you doing any classes or seminars other than Rhode Island in the future? I know that is where your office is, just wondering, thanks, Also this set of classes you are doing will manuals be available for those who cannot attend? thanks

Comments

  • Combustion TEsting on Design Gas Equipment

    Hi Folks,

    We will be running a special 3-day class June 8th, 9th and 10th on COMBUSTION TESTING OF DESIGN GAS EQUIPMENT. The cost is $795 for the three days and includes three manuals.

    It will cover testing both conventional equipment and Mod/Con equipment testing and adjustment.

    We will also be using 4 or 5 different combustion testers. You can also bring your own tester and you will receive instruction on how to use it properly.

    PAYMENT MUST BE RECEIVED TO BE REGISTERED
    (NON-REFUNDABLE)

    ALL CLASSES WILL BE HELD AT

    338 Metacom Ave., Warren, Rhode Island

    8:00 AM to 4:30 PM

    Name ____________________________________________

    Company_________________________________________

    Street____________________________________________

    P.O. Box _________________________________________

    City ___________________ State __________ Zip ______

    Phone ______________ - ______________ - ___________

    FAX Number __________- _____________- ___________

    e-mail address______________________________________

    SEND CHECK OR MONEY ORDER TO –

    GAS APPLIANCE SERVICE TRAINING AND CONSULTING

    22 GRIFFITH DRIVE

    RIVERSIDE, R.I. 02915

    401-437-0557

    FAX 401-270-1893

    e-mail gastc@cox.net

    or TimMcelwain@gastc.necoxmail.com




  • I will do

    seminars anywhere in the country all I need is a sponsor to set up a place and get the word out.

    All of my seminars have manuals available as listed in my catalog. I will send you off a catalog.
  • Jim_47
    Jim_47 Member Posts: 244
    Class schedule & Catalog

    Tim can you send me the List/catalog as well?
  • Jim I sent

    you an E-mailwith attachements.
  • Looking for a

    couple more for the combustion class. We do not run this seminar series that often so get in now as we will not run it again until late fall.
  • Seminar

    Still time to sign up.
This discussion has been closed.