Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Pipe sizing

Unknown
Unknown
in THE MAIN WALL
If you download B&Gs syzer it`ll help if your any good at math.<BR>Try here <A HREF="http://www.bellgossett.com/BG-SystemSyzer.asp"> system syzer. </A><BR><BR>Dave

Comments

  • Jay_22
    Jay_22 Member Posts: 14
    Pipe size

    Is there a place to get hard numbers for sizing pipe for proper BTU's. I am looking at (a) how many feet of 3/4" baseboard can be on a zone. (b) how many BTU's can I get on a copper main run etc, etc,.
  • Jay_22
    Jay_22 Member Posts: 14
    Pipe size

    Is there a place to get hard numbers for sizing pipe for proper BTU's. I am looking at (a) how many feet of 3/4" baseboard can be on a zone. (b) how many BTU's can I get on a copper main run etc, etc,.
  • MikeyB
    MikeyB Member Posts: 696
    B&G

    Also look at Taco's Technical Documents on their web site, they have alot of literature
  • Joe Mattiello
    Joe Mattiello Member Posts: 720
    Document TD10 selecting circulators

    Great resource for sizing circulator, and the correct pipe diameter to accommodate the flow rate require to satisfy the load. Good stuff!!
    Joe Mattiello
    N. E. Regional Manger, Commercial Products
    Taco Comfort Solutions
This discussion has been closed.

Categories