Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Modulating Controller for Vapor?
Options
Gman_3
Member Posts: 27
Still haven't found one. Can anyone recommmend a substitute for Honeywell L91B-1019 Modulating (discontinued) controller? Am looking for a modulating controller for a vapor steam system (0-16oz)to drive a Midco RE6850 gas burner. Thanks. Glenn
0
Comments
-
The L91B 1035
might be the best choice now- I know it will mod down from high fire at 0 PSI to low fire at 1 PSI, maybe less than 1 PSI but I haven't tried going that low yet. We have them controlling PowerFlame C3/C4 gas burners.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Modulating Vapor Controller
Thanks, Frank. So far, it looks like it may be the best solution if I can't track down a L91B-1019. I'd really like to modulate between 0 and 10oz. Could always use the 1035 and have the existing pressuretrol cut out above 10oz.
If anyone knows of any other applicable vapor controllers or where I can find a Honeywell L91B-1019, would appreciate it.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements