Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
50% savings with dual MegAsteamers
With your 50% percent fuel saving, you probably gain 50% more of popeye muscles with all them fittings installed. Great looking job and too bad that you have to insulate them.
0
Comments
-
I am enjoying better than 50% fuel savings with our new dual MegAsteamers.
See Work in progress thread for pictures and details of our system. Thanks again to Dan
and everyone here for sharing your knowledge and helping me with this project.
Chips
0 -
beautiful work, great outcome.
How did you solve the hydrolevel issue?
-TerryTerry T
steam; proportioned minitube; trapless; jet pump return; vac vent. New Yorker CGS30C
0 -
Nice!
how about a pic of the completely finished job?
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Terry, we installed a couple of 450 safgard's and they work great. We also installed a couple Watts vacuum breakers and they seem to help. If Anybody needs a couple of 450CG's let me know.
Steamhead, we just finished sheet rocking the area. I will post more pictures when we get everything cleaned up.
Chips0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements