Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Becket burner rwb
Tony_54
Member Posts: 1
i can't seem to find the air ajustment on this burner, the problem is after 5 to 10 seconds the bruner locks out. The primary, and cadcell have been changed the boild was cleaned 2 months ago and oil filter was changed could this be an air problem or the ignition transformer?
0
Comments
-
More to it than that
this will require the services of a pro with proper test equipment- which unfortunately does not include everyone who services these. Have you tried the Find a Professional page of this site, under Resources at the top of this page?
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Tony
Call the guys back that seviced it. Don't keep resetting it. There could be a dozen reasons for it locking out.0 -
the burner
should not lock out that soon from not seeing a flame0 -
lockout
These new controls waste no time locking out. First 10 seconds is prepurge. peace0 -
That's
a good thing! If the burner doesn't light instantly, there's a problem!
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 913 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements