Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Crown CWD Boiler reset option
Ross_7
Member Posts: 577
The Crown literature is pretty bland on what exactly it consists of. Thanks! Now I know for future reference.
Ross
Ross
0
Comments
-
Crown CWD Boiler reset option
In Crown's literature for the CWD sealed combustion boiler, it lists an optional plug-in outdoor reset control. Has anyone used this before? Thanks in advance!
Ross0 -
Giving this one a \"bump\"
Thanks!0 -
Giving this a \"bump\"
to the top.0 -
Crown reset
When I was a contractor this was a pretty standard setup. The reset control is a Taco PC-700. Plugs right in. Program in a few parameters and your good to go. I installed at least 50 of these. To the best of my knowledge they are all still running and saving homeowners money. Good Luck, Gary0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 893 Plumbing
- 5.9K Radiant Heating
- 379 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements