Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
solar installs and lightning protection
hot_rod
Member Posts: 23,398
give him a call.
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream
trainer for Caleffi NA
Living the hydronic dream
0
Comments
-
what's the protocol?
Nice to see an increasing number of solar installs here on the Wall.
What if anything are you suggesting to customers regarding lightning protection?
Thanks.0 -
Protection for
the solar control, a surge protector that wires in the sensor line, is available from Caleffi.
In some areas they want the array grounded via a copper rod and a specific gauge of wire. I believe Wisconsin FOCUS requires grounding.
I don't see anything in the 2006 IAPMO Uniform Solar Code. It could be a state by state requirement.
hrBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Hot Rod
Any idea what the CALEFFI Part number would be? I got on their Web Site but couldn't find it. I'm trying to find a distributer here in NH. I know that the RESOL's Diff Controller is identical to CALEFFI. I'm also trying to find a RESOL distributor in my area. Thanks
Rene0 -
The number
for the collector sensor lightning protector is NA15005.
The Caleffi I-Solar control is built for us by Resol. The Caleffi branded ones do have some unique and exclusive features, variable speed outputs, V-bus on all, etc.
Check the Caleffi US website for distribution in your area. Any problems getting product, or questions let me know.
hrBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
National Lightning protection code
Standard NFPA 780
What it covers and whether Solar arrays are required to be protected I do not know. I just copied the standard listing from an Electrical web site.
Larry C0 -
Hot Rod,
Back in December, you gave me the tel Numer of your supplier. His name was Rex and his number was 414-238-2360. Is that still a good name and number? I'll probably call him to order a surge protector. I like your tea cup.
Rene0 -
Hi Hot Rod,
I gave Rex a call and because I'm a homeowner and not a contractor, he said he couldn't help me. He gave me the name of a company in Vermont. I tried sending them an E-mail and got no response. I guess I'll just have to keep looking. Thanks.
Rene0 -
Even if not required
in your area, dont it make sense. You now have a high point with metal on
the roof.
When my satelite dish was installed it has copper running down from it, bonded
to my ground rods.
Maybe DirectTV knows something.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Rene
I'll make sure you get one. What is your mailing address?
hrBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
Hot rod,
Do you want me to call you there? Rex told me that you worked there. I'm interested in the cost and I know typically you don't give prices in this forum.
Rene0 -
yup
Exactly.0 -
Rene
try me at 417 380 0485Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
shipping
Hot Rod
Did you get a chance to ship it? If you did, do you have a tracking number? Thanks for your help.
Rene0 -
It's on the way
My gal shipped it, I'm out of town. I find out if it went snail mail or UPS.
hrBob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
OK Thanks,
I'll wait to hear from you.
Rene0 -
Hot Rod
I received it today. Thanks again.
Rene0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements