Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

NEED SOME HELP

Unknown
Unknown
in THE MAIN WALL
I have a "whole" house of them. Took them out before tear down...

Comments

  • STEVE PAUL_3
    STEVE PAUL_3 Member Posts: 126
    Need some help

    We cracked an end section of Burnham 7" high, cast iron base-ray baseboard heat. We are looking for a 24" or 48" left hand,threaded end section. The problem is, it is no longer manufactured. If anyone has a piece laying around, this is your chance to get rid of it. We will pay a fair price and all shipping charges. The alternative for us would be to replace all of the existing 23' of baseboard in the room with new 9A baseboard at our expense. So if anyone has it, we want it. Call us at 732-247-2763, or E-Mail us at INFO@JACKDOLANANDSONS.COM. MANY THANKS IN ADVANCE
  • scululminny
    scululminny Member Posts: 1


    You might try Bauer Brothers Salvage 612 521 9492 Minneapolis and bargain down a bit. joe
  • STEVE PAUL_3
    STEVE PAUL_3 Member Posts: 126
    BURNHAM #7A BASE-RAY

    RJBPHD
    YOU HAVE EM WE NEED EM!
    Specifically we need 1- Burnham #7A BaseRay, 7" high X 24" long left end (with threads and leg)section. We have the push nipples, compression 90* etc. If you don't have a 24" section we can fit in a 48" section. Please contact us at INFO@JACKDOLANANDSONS.COM OR WEBEPAUL@MSN.COM OR CALL US AT 732-247-2763, ASK FOR STEVE OR MIKE SO WE CAN FIGURE OUT HOW TO PAY YOU AND SET UP FOR SHIPPING.
    THANKS STEVE PAUL
This discussion has been closed.

Categories