Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Looking for Yonkers, NY heating contractor
Options

Mad Dog_2
Member Posts: 8,267
That is your best bet. mad dog
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=299&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=299&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Looking for Yonkers, NY heating contractor
A church in Yonkers needs to replace a pneumatic temperature control system with electric, replace a vacuum condensate return system with a boiler feed system, and install a dual fuel burner. If your firm is qualified and interested, please email me.0 -
My email is andrewrudin@earthlink.net0 -
I can't bid on this job, but...
There is no need to replace the pneumatic control system. Parts ARE still available, as are valve actuators, thermostats and anything else. You probably only need a new compressor,some rebuild kits and if the lines aren't full of oil & water you can operate it for the next 50 years without any problems. Parts are available from any commercial Honeywell distributor. Try the "Find A Contractor" feature on this site.0 -
hmm sounds like a church off of Ludlow by riverdale0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 115 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 107 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 983 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements