Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Weil-McLain Ultra Venting Length

Pat_30
Member Posts: 1
What is the maximum vent length for a Ultra 80? The table in their manual says a Max of 100' with 2 elbows. Is this the total for just the flue pipe? Or is it the total for the flue and fresh air intake combined?
0
Comments
-
No, you get a 100 feet w/ 2 elbows and for each addl 3\" long
radius elbow you will deduct 7ft from the length allowed. Kapiche. Tim
Ps, no idea if Kapiche spelled that way but sounds good.0 -
Kapiche
Kapiche i think is Italian?
In German it is Kapieren or: do you Understand in English.0 -
and make sure your pitch is correct
specifically, no sags that can create condensate 'traps'0 -
100' for each
0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements