Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Old American standard boiler manuals

Big Ed_4
Big Ed_4 Member Posts: 2,992
in THE MAIN WALL
.... Any piping diagrams. It was more of a basic sketch and maintance tips. Maybe it was a owner manual. Yes the three inch would be for steam....

There was an error rendering this rich post.

Comments

  • jim s_2
    jim s_2 Member Posts: 114


    I was wondering if anyone out there had install manuals with piping diagrams for older Am Standard boilers,cica 1970ish.

    I would like to compare the way my boiler is piped vs the manufacturers drawings.

    The boiler is a #G-26-SPD
    Series# 7BNSE-J6

    I`m wondering if the plugged 3" tapping was supposed to be used for steam and the 2" was for water trim.

    Thanks Jim S
  • ed wallace
    ed wallace Member Posts: 1,613
    manuals

    does it really matter that it might not be piped to manaufacterers recommandation that old boiler is an energy hog you should be thinking of replacing it
  • Steamhead (in transit)
    Steamhead (in transit) Member Posts: 6,688
    Sure the top tapping

    wasn't 3-inch and someone bushed it down?

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • jim s_2
    jim s_2 Member Posts: 114
    nope

    2" right out of the boiler section.

    Looks like someone didn`t want to put the effort into working with 3" pipe.
This discussion has been closed.

Categories