Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Burnham Alpine
Jim Wy.
Member Posts: 43
I've got that 2500 sq. ft. slab radiant job I used two Rinnais on in 04 that we'de like to replace w/ a real boiler. The Burnham Alpine seems to be the best deal in my area but it is really important to me that my costomer have as few problems as possable even if we do have to either give up some eff. or pay more. I've always installed Allied M.G. @ 84% or Rinnai. The allied boilers have given very little problems but mod con seems like the way to go for radiant slab.
0
Comments
-
Been using the Alpine for almost a year
We have 9 installs so far and not ONE Problem. With the low water application you should 90%+ way better than a Rinnai. Your customers will love you for it!!!0 -
Indirect or tankless for domestic ?0 -
Indirect
Coil is not an option on the wall hung modulating gas boiler0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 918 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements