Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Cool project
Mike Dunn
Member Posts: 189
I recently abandoned my 40 gal nat gas gravity vent WH when I installed my solar WH and boiler w/indirect.
I want to cut apart the water heater and display it at my shop so customers can take a gander.
Any ideas on how big a slice to remove and how to do it?
Mike Dunn
I want to cut apart the water heater and display it at my shop so customers can take a gander.
Any ideas on how big a slice to remove and how to do it?
Mike Dunn
0
Comments
-
Slice of pie
don't know how big but somewhere around a quarter section.A grinder with a cut off wheel would work great. I take a 4.5 grinder with a 6" wheel put on my welding gloves and go for it.0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements