Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Ray Boiler

Timco
Timco Member Posts: 3,040
in THE MAIN WALL
I have a few in now and they run great. Customers are happy. My local rep took care of any issues, and Mestek is good about helping out. I am continuing to offer them with good success. Knights do not weigh as much, but are SS HX not CI.

Tim
Just a guy running some pipes.

Comments

  • CC.Rob_11
    CC.Rob_11 Member Posts: 15


    Anyone have feedback on the new Ray boiler, problems, tech support, parts etc?
  • Dave Stroman
    Dave Stroman Member Posts: 766


    I have installed one so far with good results. I am looking forward to doing more. I think the cast iron is such a good idea. It does weigh 500#.

    Dave Stroman

    There was an error rendering this rich post.

  • Uni R_2
    Uni R_2 Member Posts: 589
    Indirect Sizing

    I'd be tempted to upsize the indirect with the Ray. Having to heat up 500 pounds every time there is a domestic hot water call isn't going to translate into good efficiency on shorter burns, especially in the summer.
  • Maine Ken
    Maine Ken Member Posts: 531


    With 200k btu's firing the indirect recovery has not been an issue. I have two running now. Both have 80 gallon SSUs. One is a six unit building and the other is a five unit. Neither building has ever had as much and as consistant hot h2o as they do now. Number three is going in this week. It is a fantastic product and is extremely well supported by Mestek and our local Mestek Rep.

    I will continue to spec these out without hesitation.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories