Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
condensate piping
Brad White_204
Member Posts: 20
is fine for "water only", but I would use not less than Type L for longevity.
Condensate carries particulates as you know and those are abrasive over time, especially with stop-start pumps. The fittings take the brunt of this of course and at least those are heavier wall wrought copper. But the walls do get a polishing too.
My $0.02
Brad
Condensate carries particulates as you know and those are abrasive over time, especially with stop-start pumps. The fittings take the brunt of this of course and at least those are heavier wall wrought copper. But the walls do get a polishing too.
My $0.02
Brad
0
Comments
-
replaceing condensate piping
can i repipe in copper between a condensate tank and a steam boiler?B0 -
Shouldn't be a problem
as long as the piping carries no steam.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
conensate piping
definately no steam just hot water back to boiler0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements