oil furnace lo boy 450,000 btu

burnerman_2

First what about a boiler with a coil? or what about 2 hot air furnaces so when the temps are in th 50's the smaller would handle it. sometimes this works we have a club that has 4 100,000 btu furnaces all indepentent of each other just a thought.

oil-2-4-6-gas

looking for a lo-boy furnace oil 450,000 btu anyone know of any brands, all i could find was a Cox furnace -Boyerton Hallmark but it only goes to 400,000 btu --

Ken Field

Check Armstrong

I put in a 350,000 oil from their commercial line last year and it was made pretty well. They may have a 400.

Ken F

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

oil-2-4-6-gas

this customer is not a good paying customer // so they are only getting as near a replacement as i can get with minimal sheetmetal work -- no new engineering,design no copper piping --it will still have the oil line flushed,new electrical ,change oil filter --a quality job but certainly nothing exceptional -- we may just go with the 400,000 btu Cox furnace -- turns out ,they were running the old 1 at a reduced firing rate the site has about 16 boilers, 8 water heaters , 3 furnaces we have never worked on the furnaces, until this past week