Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

enviraCOM??

Rich P._3
Rich P._3 Member Posts: 2
in THE MAIN WALL
Hi
I just installed a Weil UO3 with a 7184P
Could not get it started without jumping tt on the primary.
I removed the wire on #3 and left it for the night.

What is enviracom for? What did I do wrong, I still have to finish the low voltage zone valve wiring
but i ran out of time..
No tankless and soon to have a Super Stor
Thanks
Rich

Comments

  • John@Reliable_14
    John@Reliable_14 Member Posts: 171
    What did u do wrong?

    Aquastat is a cold start, so unless t-t is hooked up to something it does nothing. Enviracom is a testing port
  • Rich P._3
    Rich P._3 Member Posts: 2


    TT from endswithces are connected to tt terminal strip
    runs circ but not burner, only if i jumpp tt on 7184P
    any ideas?
    Rich
This discussion has been closed.

Categories