Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

looking for infor on the odessy cold start from new york boiler

John_221
John_221 Member Posts: 1
in THE MAIN WALL
well im getting ready to buy a new boiler thinking on getting a cold start system from new york boiler. odessy is the one imlooking at also going with an indirect DHW boiler. House is 2200 and oil hot water . Just looking if any one else has experience with this model or coldstart system.?

thanks

Comments

  • kpc_43
    kpc_43 Member Posts: 21
    Most boilers

    these days are cold start.. I have installed 1 NYT oddessy. It was a decent boiler althogh it did take more work to assemble the jacket, burner and insulation. The control (HWell) was not very well placed and the Sentry control at the time had issues. It was not easy to get )as my supplier was not stocking them) so I went back to Buderus. It is in the same class as a Pensotti or a Biasi (low mass. triple pass) Buderus has a higher water content.
This discussion has been closed.

Categories