Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

W/M Gold ignitor

Wayco Wayne_2
Wayco Wayne_2 Member Posts: 2,479
in THE MAIN WALL
an old W/M Gold yesterday. It had a bad igniter. No problem getting a new one from a supply house, but the old one was stuck in the boiler. The screws wouldnt come out and were frozen in the block. To get the old ignitor out I had to break the heads off the screws. Co-incidently the new igniter came with new screws so I'm inclined to think this is a common problem with this boiler. I could not get the screws out of the block. I soaked them in Kroil anti seize spray, heated around them with a torch. They wouldnt budge. Has anyone had the same problem and what was your solution? WW

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=255&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Comments

  • tim smith
    tim smith Member Posts: 2,807
    I would say it would be drill and tap for new screws, put anti

    seize on the screws when you put them in. Tim
This discussion has been closed.

Categories